TCNA logo

login-sign-up-button

Glass Tile Testing

Check each test you would like performed. The number of tiles required to complete the test are noted by each test method. Expedited testing is offered on a time available basis and will incur the following additional charge: initiated within 24 hours - 100% surcharge or initiated in 3 to 5 days - 50% surcharge.

Note: The glass manufacturer is responsible to provide the information about the type of glass (i.e., cast, fused or low temperature, mosaic, large format, etc.).

*Tests marked with one asterisk may be outsourced to another laboratory. Please contact TCNA Lab for further information.

**The price for ANSI A137.2-7.6 is based on minimum lot size units (2 to 8) and it may change depending on the lot size units.

Samples are discarded upon completion of testing. If you would like the samples returned, please note that when submitting your order.

Client is responsible for all shipping charges.

Prices do not include cost of additional materials required to perform tests. Prices are subject to change without notice.

If any deviation from standard materials used or test procedure followed is desired, the client must provide the request when the order form is submitted prior to starting the test. Any additional cost will be charged accordingly.

Note: Requests for format and labeling changes or additional copies of a test report will be billed at USD 25.00 per reprint.

TCNA test reports are sent electronically to the email address submitted with the order. A hard copy is only provided upon request for an additional charge of USD 20.00 (postage included for mailing within the US only). Requests for changes to previous reports or requests for additional hard copies of a test report will be billed at USD 30.00 per report.

Filter
Display # 
Qty. Testing Options Price Test
$125.00

ANSI A137.2-7.6** Mounting Allowable Deviation from Nominal Joint Size

Lot size unit - 2 to 8

More Info
$250.00

ANSI A137.2-7.7 Bond Strength

8 tiles - 4" x 4" or array of tiles 4" x 4"

More Info
$200.00

ANSI A137.2-7.8 Compressive Strength

10 whole tiles - for glass tiles less than 1" x 1"

More Info
$250.00

ANSI A137.2-7.9 Thermal Shock Resistance

5 whole tiles

More Info
$450.00

ASTM C372* Linear Thermal Expansion—T from -4°F (-20ºC) to 212°F (100°C)

One (1) whole tile is required for a single test.

More Info
$250.00

ASTM C372 Linear Thermal Expansion—T from 86°F (30°C) to 212°F (100°C)

One (1) whole tile is required for a single test.

More Info
$225.00

ASTM C373 Water Absorption

5 whole tiles

More Info
$250.00

ASTM C424 Crazing Resistance

10 whole tiles. Test performed as per ANSI A137.2 at 150-psi steam pressure for one cycle. Please contact TCNA Lab prior to the start of testing if a different testing procedure is desired.

More Info
$750.00

ASTM C485, ASTM C499, and ASTM C502 Warpage, Facial and Thickness Dimensions, and Wedging

10 whole tiles – For tiles with any side larger than 24”, contact TCNA Lab for quotation. Also, please provide
the nominal size.

More Info
$450.00

ASTM C609 Measurement of Light Reflectance Value and Small Color Differences

5 tiles - 4" x 4"

More Info
$1,750.00

ASTM C627 Robinson Floor

16 sq. ft./all materials, except substrate

More Info
$200.00

ASTM C648 Breaking Strength

10 whole tiles - for glass tiles less than 3" x 3" and greater than 1" x 1"

More Info
$300.00

ASTM C650** Chemical Resistance

15 tiles - 2" x 2"

More Info
$550.00

ASTM C895* Lead and Cadmium Extracted from Glazed Ceramic Tiles

6 whole tiles

More Info
$750.00

ASTM C1026 Freeze-Thaw (up to 300 cycles)

5 tiles – 3” x 3”

More Info
$400.00

ASTM C1027 Surface Abrasion

16 tiles - 4" x 4"

More Info
$350.00

ASTM C1028 Static Coefficient of Friction (wet-dry)

3 tiles - 6" x 6" or larger

More Info
$225.00

ASTM C1378 Staining Resistance

4 tiles - 2" x 2" and 2 tiles - 4" x 4"

More Info
$1,500.00

ASTM G21 Resistance of Synthetic Polymeric Materials to Fungi

Contact TCNA Lab for sampling information.

More Info
$200.00

DCOF Acutest® Dynamic Coefficient of Friction (wet only)

wet only; 3 tiles - 10" x 10" or larger

More Info
$200.00

ISO 10545-4 M.O.R. and Breaking Strength

10 whole tiles - for glass tiles larger than 3" x 3"

More Info
$90.00

Mohs Scratch Hardness

3 whole tiles

More Info

Check each test you would like performed. The number of tiles required to complete the test are noted by each test method. Expedited testing is offered on a time available basis and will incur the following additional charge: initiated within 24 hours - 100% surcharge or initiated in 3 to 5 days - 50% surcharge.

Note: The glass manufacturer is responsible to provide the information about the type of glass (i.e., cast, fused or low temperature, mosaic, large format, etc.).

*Tests marked with one asterisk may be outsourced to another laboratory. Please contact TCNA Lab for further information.

**The price for ANSI A137.2-7.6 is based on minimum lot size units (2 to 8) and it may change depending on the lot size units.

Samples are discarded upon completion of testing. If you would like the samples returned, please note that when submitting your order.

Client is responsible for all shipping charges.

Prices do not include cost of additional materials required to perform tests. Prices are subject to change without notice.

If any deviation from standard materials used or test procedure followed is desired, the client must provide the request when the order form is submitted prior to starting the test. Any additional cost will be charged accordingly.

Note: Requests for format and labeling changes or additional copies of a test report will be billed at USD 25.00 per reprint.

TCNA test reports are sent electronically to the email address submitted with the order. A hard copy is only provided upon request for an additional charge of USD 20.00 (postage included for mailing within the US only). Requests for changes to previous reports or requests for additional hard copies of a test report will be billed at USD 30.00 per report.